Rotary union, with left hand thread, G 1" LH to second thread G 1", length 105 mm, D 23 mm

Where a line has to follow a rotary movement, the rotary union prevents the hose from twisting. The thread G 1" LH and the second thread G 1" accept the mating part. The operating pressure is stated as a maximum of 50 bar. The overall length comes to 105 mm.

Benefits

• The thread G 1" LH fits the existing port without an adapter.
• At 105 mm the overall length is defined in the data sheet and can be planned in advance.
• The rotatable connection prevents the line from twisting over a full 360 degrees.
• Alignment takes place after screwing in, which saves 1 additional angle piece.
• The operating pressure of a maximum of 50 bar defines the load limit of the joint.

Applications

Rotatable connections on drums and shafts, swivel arms, hose reels and moving tools. The selection follows the existing port and the operating load of the system.