Images are examples, some edited with AI. The technical data are authoritative. AI notice
Parallel gripper DHPL-10-20-P-A - Festo 8112216
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Technical data
| Size | 10 |
|---|---|
| Total stroke | 20 mm |
| Stroke per gripper jaws | 10 mm |
| Max. replacement accuracy | 0.2 mm |
| Max. angular gripper jaw backlash ax, ay | 0.22 deg |
| Max. gripper jaw backlash Sz | 0.064 mm |
| Rotationally symmetrical | 0.2 mm |
| Repetition accuracy, gripper | 0.03 mm |
| Number of gripper jaws | 2 |
| Drive system | Pneumatic |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Gripper function | Parallel |
| Gripper force back-up | None |
| Design | Rack and pinion |
| Guide | Plain-bearing guide |
| Position detection | Via proximity switch |
| Operating pressure | 2.5 ... 8 bar |
| Max. operating frequency of gripper | 2 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 41 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 70 ms |
| Max. mass per external gripper finger | 54 g |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Degree of protection | IP54 |
| Ambient temperature | -10 ... 60 °C |
| Total gripping force, opening, 0.6MPa (6bar, 87 psi) | 60 N |
| Total gripping force, closing, 0.6MPa (6bar, 87 psi) | 38 N |
| Gripper force per gripper jaw, opening, 0.6 MPa (6 bar, 87 psi) | 30 N |
| Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi) | 19 N |
| Mass moment of inertia | 1.6 ... 2.2 kgcm² |
| Max. force on gripper jaw Fz static | 40 N |
| Max. torque at gripper Mx static | 0.5 Nm |
| Max. torque at gripper My static | 0.5 Nm |
| Max. torque at gripper Mz static | 0.5 Nm |
| Maintenance interval | Lifetime lubrication |
| Product weight | 251 g |
| Type of mounting | Either:, With through-hole |
| Pneumatic connection | M5 |
| Note on materials | RoHS compliant |
| Material cover cap | Wrought aluminium alloy, anodised |
| Material cover | Anodised wrought aluminium alloy |
| Material end plate | Anodised wrought aluminium alloy |
| Material housing | Anodised wrought aluminium alloy |
| Material gripper jaws | Anodised wrought aluminium alloy |
| Material piston seal | TPE-U(PU) |
| Material piston rod | High-alloy stainless steel |
| Material o-ring | NBR |
| Material screws | Galvanised steel |
| Gear rack material | High-alloy stainless steel |
| Gear wheel material | Sintered bronze |
| Weight | 0.28 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DHPL-10-20-P-A |
| EAN | 4052568573157 |
| Zolltarifnummer | 84798997 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
