Images are examples, some edited with AI. The technical data are authoritative. AI notice
Pneumatic parallel gripper size 25, stroke per jaw 11 mm DHPC-L-25-A-NC-S - Festo 8116876
The parallel gripper DHPC-L-25-A-NC-S holds prismatic and round parts and delivers 145.7 N gripping force per jaw when opening at 6 bar. 11 mm stroke per jaw, repetition accuracy 0.02 mm, single-acting, normally closed, ball guide. Runs on 2.5 to 8 bar via M5 port.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
145.7 N gripping force per jaw when opening at 6 bar: that is what the size 25 parallel gripper DHPC-L-25-A-NC-S provides. Both jaws move parallel towards each other. Version DHPC-L-25-A-NC-S: single-acting, normally closed, ball guide, standard finger mounting.
Benefits
- 145.7 N gripping force per jaw when opening at 6 bar
- Repetition accuracy 0.02 mm, replacement accuracy 0.2 mm
- 11 mm stroke per jaw, with max. 160 g per external gripper finger
- Closing time from 83 ms, opening time from 176 ms at 6 bar, operating frequency 3 Hz
- Gripping force retention when closing
- Corrosion resistance class CRC 0, ambient temperature -10 to 60 °C
Applications
Typical tasks for the DHPC-L-25-A-NC-S are assembly, feeding and pick-and-place in automated systems, at -10 to 60 °C ambient temperature. Gripper fingers are mounted on the jaws, each external finger may weigh up to 160 g. Position detection with proximity switches. The DHPC-L-25-A-NC-S is suitable for battery production with reduced Cu/Zn/Ni values (F1a). Shipping weight 0.55 kg.
Technical data
| Size | 25 |
|---|---|
| Stroke per gripper jaw | 11 mm |
| Max. replacement accuracy | 0.2 mm |
| Max. angular gripper jaw backlash ax, ay | 0° |
| Max. gripper jaw backlash Sz | 0 mm |
| Rotational symmetry | 0.2 mm |
| Repetition accuracy, gripper | 0.02 mm |
| Number of gripper jaws | 2 |
| Drive system | Pneumatic |
| Mounting position | Any |
| Mode of operation | Single-acting, normally closed |
| Gripper function | Parallel |
| Gripping force retention | During closing |
| Design | Lever, Standard mounting method for gripper fingers, Positively driven motion sequence |
| Guide | Ball guide |
| Position detection | Via proximity switch |
| Operating pressure | 2.5 to 8 bar |
| Max. operating frequency of gripper | 3 Hz |
| Min. opening time at 6 bar | 176 ms |
| Min. closing time at 6 bar | 83 ms |
| Max. mass per external gripper finger | 160 g |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating medium | Lubricated operation possible, after that always operate lubricated |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Ambient temperature | -10 to 60 °C |
| Total gripping force, opening at 6 bar | 291.4 N |
| Gripping force per gripper jaw, opening at 6 bar | 145.7 N |
| Mass moment of inertia | 2.18 kgcm² |
| Max. force on gripper jaw Fz static | 155.9 N |
| Max. torque at gripper Mx static | 2.52 Nm |
| Max. torque at gripper My static | 4.83 Nm |
| Max. torque at gripper Mz static | 2.52 Nm |
| Product weight | 495 g |
| Type of mounting | Direct mounting via through-hole, Direct mounting via thread, On mounting frame, Via through-hole and dowel pin, Via female thread and dowel pin |
| Pneumatic connection | M5 |
| Note on materials | RoHS compliant |
| Housing material | Anodised aluminium |
| Gripper jaw material | High-alloy stainless steel |
| Weight | 0.55 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DHPC-L-25-A-NC-S |
| EAN | 4052568564490 |
| Zolltarifnummer | 84798997 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | M5 |
| Medium | Compressed air |
| Function | single-acting |
| Actuation type | pneumatic |
| Betriebsdruck max [bar] | 8 |
| Temperaturbereich | -10-60 °C |
| Temperature (max.) | 60 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







