Images are examples, some edited with AI. The technical data are authoritative. AI notice

Quarter turn actuator DFPD-N-700-RP-90-RS60-F1012-R3-EP - Festo 8068931

Festo ✓ Original product Brand new
Net
€1,083.79
excl. VAT
Item FES-8068931
Manufacturer no. DFPD-N-700-RP-90-RS60-F1012-R3-EP
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Technical data

Size of valve actuator700
Flange hole patternF1012
Swivel angle90 deg
End-position adjustment range at 0°-5 ... 5 deg
End-position adjustment range at nominal swivel angle-5 ... 5 deg
Shaft connection depth29 mm
Fitting connection conforms to standardISO 5211
Mounting positionAny
Mode of operationSingle-acting
DesignRack and pinion
Closing directionCloses to the right
Valve connection conforms to standardVDI/VDE 3845 (NAMUR)
Connection point for positioner and position sensor conforms to standardVDI/VDE 3845 size AA 2
Device type according to VDMA 66413Safety device
Safety functionThe safety function consists of the actuator switching to the specified safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved through the spring force of the spring assem
Safety Integrity Level (SIL)up to SIL 2 Low Demand mode, Up to SIL 3 in a redundant architecture, Up to SIL 1 high demand mode
Certified for safety function to ISO 13849 and IEC 61508 (SIL)Product can be used in SRP/CS up to SIL 2 (Low Demand), Product can be used in SRP/CS up to SIL 1 (High Demand), Up to SIL 3 in a redundant architecture
Burst pressure24 bar
Operating pressure2 ... 8 bar
Nominal operating pressure6 bar
Maritime classificationSee certificate
CE mark (see declaration of conformity)To EU Explosion Protection Directive (ATEX)
UKCA marking (see declaration of conformity)To UK EX instructions
Explosion protection certification outside the EUEPL Gb (GB)
Explosion protectionZone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX)
Certificate issuing authorityDNV TAP00001CE, German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023
ATEX category gasII 2G
ATEX category dustII 2D
Explosion ignition protection type for gasEx h IIC T4 Gb X
Explosion ignition protection type for dustEx h IIIC T105°C Db X
Explosion ambient temperature-20°C <= Ta <= +80°C
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumDew point at least 10 °C below the ambient temperature and temperature of the medium, Lubricated operation possible (in which case lubricated operation will always be required)
LABS (PWIS) conformityVDMA24364-B1/B2-L
Storage temperature-20 ... 60 °C
Ambient temperature-20 ... 80 °C
Torque at nominal operating pressure and 0° swivel angle465.5 Nm
Torque at nominal operating pressure and 90° swivel angle252.8 Nm
Note on torqueThe operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling.
Spring return torque at 0° swivel angle258.1 Nm
Spring return torque at 90° swivel angle470.7 Nm
Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0°24.5 l
Product weight26268 g
Shaft connectionT27
Pneumatic connection1/4 NPT
Note on materialsRoHS compliant
Material sub-baseCoated wrought aluminium alloy
Material coverCoated die-cast aluminium
Material sealsNBR
Material springSpring steel
Material housingAluminium, powder-coated
Material pistonDie-cast aluminium
Material bearingPOM
Material camSteel
Material screwsHigh-alloy stainless steel
Material shaftHigh-alloy stainless steel
ManufacturerFesto
Hersteller-NrDFPD-N-700-RP-90-RS60-F1012-R3-EP
EAN4052568444891
Zolltarifnummer84123900
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product

Downloads

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

Customers Who Bought This Item Also Bought