Schwenkantrieb DFPD-4500-RP-90-RD-F16 - Festo 8211839

Images are examples, some edited with AI. The technical data are authoritative. AI notice

Quarter turn actuator, double-acting, 3998.6 Nm, size 4500, flange F16 DFPD-4500-RP-90-RD-F16 - Festo 8211839

Name: Quarter turn actuator, double-acting, 3998.6 Nm, size 4500, flange F16 DFPD-4500-RP-90-RD-F16 - Festo 8211839
Brand: Festo
SKU: FES-8211839
Price: 3656.99 EUR
Availability: InStock

Festo ✓ Original product Brand new

Double-acting DFPD in size 4500 for quarter-turn valves, mounted via flange F16 to ISO 5211. At 5.24 bar nominal pressure the T46 shaft delivers 3998.6 Nm. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand. Weight 109 kg.

Net

€3,656.99

excl. VAT

Item FES-8211839

Manufacturer no. DFPD-4500-RP-90-RD-F16

Question about this item

Datasheet (PDF)

Specialist dealer since 2009
Invoice payment for regular customers
Worldwide shipping
Technical questions clarified with the manufacturer

Description

With up to 3998.6 Nm at 5.24 bar nominal pressure, the size 4500 DFPD operates ball valves and butterfly valves with flange pattern F16. Flange pattern F16 to ISO 5211 and shaft connection T46, depth 50 mm fit directly onto the valve top.

Benefits

Torque 3998.6 Nm at 5.24 bar nominal pressure
Valve interface to ISO 5211: flange F16, shaft connection T46
Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve, positioner and position sensor interface size AA 3
For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6 Gb
Air consumption 404.6 l per switching cycle at 6 bar
End position at 0° adjustable by -5 to 5°

Applications

Typical tasks are on/off actuation of ball valves, butterfly valves and plug valves with top flange F16. ATEX category II 2G/2D permits use of the DFPD-4500 in zones 1 and 2 as well as zones 21 and 22. The size 4500 DFPD is supplied with compressed air to ISO 8573-1:2010 [7:3:4] within 2 to 5.2 bar. For sizing the valve bracket: product weight 109 kg.

Technical data

Order code	DFPD-4500-RP-90-RD-F16
Festo part number	8211839
Size of valve actuator	4500
Flange hole pattern	F16
Swivel angle	90°
End-position adjustment range at 0°	-5 to 5°
End-position adjustment range at nominal swivel angle	-5 to 5°
Shaft connection depth	50 mm
Fitting connection conforms to standard	ISO 5211
Mounting position	any
Mode of operation	double-acting
Design	rack and pinion
Closing direction	closes to the right
Valve connection conforms to standard	VDI/VDE 3845 (NAMUR)
Connection point for positioner and position sensor conforms to standard	VDI/VDE 3845 size AA 3
Safety function	the safety function consists of the actuator switching to the specified safety switching position, This switching movement is achieved by pressurising the corresponding pressure chamber with compressed air, The value of the generated torque depends on the
Safety Integrity Level (SIL)	up to SIL 2 Low Demand mode, Up to SIL 3 in a redundant architecture
Certified for safety function to ISO 13849 and IEC 61508 (SIL)	Product can be used in SRP/CS up to SIL 2 (Low Demand), Up to SIL 3 in a redundant architecture
Burst pressure	15.72 bar
Operating pressure	2 to 5.2 bar
Nominal operating pressure	5.24 bar
CE mark (see declaration of conformity)	to EU Explosion Protection Directive (ATEX)
UKCA marking (see declaration of conformity)	to UK EX regulations
Explosion protection certification outside the EU	EPL Gb (GB)
Explosion protection	Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX)
Certificate issuing authority	German Technical Control Board (TÜV) Rheinland 968/V 2959.00/2025
ATEX category gas	II 2G
ATEX category dust	II 2D
Explosion ignition protection type for gas	Ex h IIC T6 Gb
Explosion ignition protection type for dust	Ex h IIIC T85°C Db
Explosion ambient temperature	-20 to 80 °C
Operating medium	Compressed air to ISO 8573-1:2010 [7:3:4]
Note on operating and pilot medium	dew point at least 10 °C below the ambient temperature and temperature of the medium, Lubricated operation possible (in which case lubricated operation will always be required)
LABS (PWIS) conformity	VDMA24364 zone III
Storage temperature	-20 to 60 °C
Ambient temperature	-20 to 80 °C
Torque at nominal operating pressure and 0° swivel angle	3998.6 Nm
Torque at nominal operating pressure and 90° swivel angle	3998.6 Nm
Note on torque	The operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°	404.6 l
Product weight	109000 g
Shaft connection	T46
Pneumatic connection	G1/2
Note on materials	RoHS compliant
Material connecting plate	anodised wrought aluminium alloy
Material cover	painted die-cast aluminium
Material seals	NBR
Material housing	anodised aluminium
Material number housing	EN AW-6005
Material piston	die-cast aluminium
Material bearing	POM
Material screws	high-alloy stainless steel
Material shaft	steel, nickel-plated
Weight	134 kg
Manufacturer	Festo
Hersteller-Nr	DFPD-4500-RP-90-RD-F16
EAN	4052568769765
Zolltarifnummer	84123900
GPSR Herstellerdaten	Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
Artikelzustand	New
Artikel-Authentizität	Original product
Material	Aluminium
Thread	G 1/2
Seal material	NBR
Medium	Compressed air
Function	double-acting
Actuation type	pneumatic
Norm	ISO 5211, VDI/VDE 3845
Series	DFPD
Betriebsdruck max [bar]	5
Temperaturbereich	-20-80 °C
Temperature (max.)	80