Festo
Quarter-turn actuator, double-acting, 1920 Nm, flange F14, ATEX DAPS-1920-090-R-F14-MW-T6 - Festo 8005024
Item FES-8005024
€4,174.52
Images are examples, some edited with AI. The technical data are authoritative. AI notice
Quarter turn actuator, single-acting, spring return, size 1200, flange F14 DFPD-1200-RP-90-RS35-F14-R3-C-VDE2 - Festo 8102903
Single-acting quarter turn actuator with rack and pinion for process valves with flange pattern F14 to ISO 5211. The spring holds at least 264.9 Nm, with compressed air (3.5 bar) 302.9 to 479.2 Nm are available. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand. Weight 40 kg.
Net
excl. VAT
€1,702.07
Item
FES-8102903
Manufacturer no.
DFPD-1200-RP-90-RS35-F14-R3-C-VDE2
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
For on/off valves with a safety position: the DFPD-1200-RP-90-RS35-F14-R3-C-VDE2 is single-acting with spring return and reaches up to 479.2 Nm at 3.5 bar. Flange pattern F14 to ISO 5211 and shaft connection T36, depth 38 mm fit directly onto the valve top.
Benefits
- Air torque 302.9 to 479.2 Nm at 3.5 bar, spring return torque 264.9 to 441.3 Nm
- Safety position by spring force if air supply fails, device type to VDMA 66413: safety component
- Valve interface to ISO 5211: flange F14, shaft connection T36
- Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve, positioner and position sensor interface size AA 3
- For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T4 Gb X
- Suitable for safety-related control systems (SRP/CS) up to SIL 2 Low Demand
Applications
It operates 90-degree valves with top flange F14, for example ball valves or butterfly valves in pipelines. For hazardous areas: the actuator with flange F14 is rated ATEX II 2G/2D for zones 1 and 2 as well as zones 21 and 22. The DFPD-1200-RP-90-RS35-F14-R3-C-VDE2 runs on compressed air to ISO 8573-1:2010 [7:4:4] within 2 to 8 bar. The product weight is 40 kg.
Technical data
| Order code | DFPD-1200-RP-90-RS35-F14-R3-C-VDE2 |
|---|---|
| Festo part number | 8102903 |
| Size of valve actuator | 1200 |
| Flange hole pattern | F14 |
| Swivel angle | 90° |
| End-position adjustment range at 0° | -5 to 5° |
| End-position adjustment range at nominal swivel angle | -5 to 5° |
| Shaft connection depth | 38 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Mounting position | any |
| Mode of operation | single-acting |
| Design | rack and pinion |
| Closing direction | closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Connection point for positioner and position sensor conforms to standard | VDI/VDE 3845 size AA 3 |
| Device type according to VDMA 66413 | safety component |
| Safety function | With the compressed air switched off and the spring chamber exhausted, the actuator moves into the defined safety position, This movement is produced by the force of the spring assembly |
| Safety Integrity Level (SIL) | up to SIL 2 Low Demand mode, Up to SIL 3 in a redundant architecture, Up to SIL 1 high demand mode |
| Certified for safety function to ISO 13849 and IEC 61508 (SIL) | Product can be used in SRP/CS up to SIL 2 (Low Demand), Product can be used in SRP/CS up to SIL 1 (High Demand), Up to SIL 3 in a redundant architecture |
| Burst pressure | 24 bar |
| Operating pressure | 2 to 8 bar |
| Nominal operating pressure | 3.5 bar |
| Marine classification | see certificate |
| CE mark (see declaration of conformity) | to EU Explosion Protection Directive (ATEX) |
| UKCA marking (see declaration of conformity) | to UK EX regulations |
| Explosion protection certification outside the EU | EPL Gb (GB) |
| Explosion protection | Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX) |
| Certificate issuing authority | DNV TAP00001CE, German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T4 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T105°C Db X |
| Explosion ambient temperature | -20 to 80 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | dew point at least 10 °C below the ambient temperature and temperature of the medium, Lubricated operation possible (in which case lubricated operation will always be required) |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Storage temperature | -20 to 60 °C |
| Ambient temperature | -20 to 80 °C |
| Torque at nominal operating pressure and 0° swivel angle | 479.2 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 302.9 Nm |
| Note on torque | The operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling |
| Spring return torque at 0° swivel angle | 264.9 Nm |
| Spring return torque at 90° swivel angle | 441.3 Nm |
| Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° | 43.5 l |
| Product weight | 40042 g |
| Shaft connection | T36 |
| Pneumatic connection | G1/4 |
| Note on materials | RoHS compliant |
| Material connecting plate | anodised wrought aluminium alloy |
| Material cover | anodised die-cast aluminium |
| Material seals | NBR |
| Material spring | spring steel |
| Material housing | anodised aluminium |
| Material piston | die-cast aluminium |
| Material bearing | POM |
| Material cam | steel |
| Material screws | high-alloy stainless steel |
| Material shaft | high-alloy stainless steel |
| Manufacturer | Festo |
| Hersteller-Nr | DFPD-1200-RP-90-RS35-F14-R3-C-VDE2 |
| EAN | 4052568456085 |
| Zolltarifnummer | 84123900 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/4 |
| Seal material | NBR |
| Medium | Compressed air |
| Function | single-acting |
| Actuation type | pneumatic |
| Norm | ISO 5211, VDI/VDE 3845 |
| Series | DFPD |
| Betriebsdruck max [bar] | 8 |
| Temperaturbereich | -20-80 °C |
| Temperature (max.) | 80 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
Customers Who Bought This Item Also Bought
Festo
Quarter turn actuator, single-acting, spring return, size 2300, flange F16 DFPD-2300-RP-90-RS35-F16-R3-C - Festo 8102908
Item FES-8102908
€2,855.99
Festo
Quarter turn actuator, single-acting, spring return, size 0015, flange F03/F05 DAPS-0015-090-RS4-F0305-T4 - Festo 8030613
Item FES-8030613
€231.81
Festo
Quarter turn actuator, double-acting, 2233.3 Nm, size 2300, flange F1216 DFPD-N-2300-RP-90-RD-F1216 - Festo 8068940
Item FES-8068940
€1,782.22
Festo
Piston actuator for process valves, stroke 17 mm, double-acting, cast stainless steel DFPK-46-17-D-V4 - Festo 8083962
Item FES-8083962
€266.77
Festo
Quarter turn actuator, single-acting, spring return, size 700, flange F12 DFPD-N-700-RP-90-RS45-F12-R3-C - Festo 8102883
Item FES-8102883
€1,093.59
Festo
Quarter turn actuator, single-acting, spring return, size 300, flange F10 DFPD-300-RP-90-RS45-F10-R3-C - Festo 8102852
Item FES-8102852
€586.75
Festo
Quarter turn actuator, single-acting, spring return, size 300, flange F0710 DFPD-300-RP-90-RS60-F0710 - Festo 8048140
Item FES-8048140
€388.64