Coupling plug Twist Plug TS-30PM, steel - Nitto Kohki 317600340

Twist Plug is a steel plug for Nitto Kohki quick connect couplings. It turns while coupled, so the attached hose follows the movement instead of twisting up.

• Rotating design keeps the hose from twisting during work
• Steel body built for everyday workshop use
• NBR seal across all models in the TS range
• Connect and disconnect by hand, with no tools
• Male thread and female thread models available within the range

Technical data from the manufacturer catalogue

Dimensions

Dimensions in millimetres. Values in brackets apply in the connected condition.

Legend: B = bore

Models in this series TWIST PLUG

Every model of the series as printed in the manufacturer catalogue. The row of the article offered here is highlighted.

Operating principle

• A plug with a free twisting neck for hose connections to pneumatic tools and devices.
• Free angle control provides comfortable job positions, even in narrow spaces or with overhead works.
• The flexible part is reinforced with self-lubricating plastics to give smooth bending action and excellent durability.
• Dust protector over the flexible part prevents dirt and swarf from entering.
• Eliminates hose twisting, kinking, or bending. Greatly improves working efficiency.

Series comparison

TWIST PLUG is specified when hose twisting or kinking at a pneumatic tool has to be eliminated and the socket already in place belongs to the HI CUPLA or NUT CUPLA series. Its air rating is 1.0 MPa {10 kgf/cm2}, so lines run at 1.5 MPa {15 kgf/cm2} call for one of the sibling series rated at that pressure, such as HI CUPLA BL, NUT CUPLA, LOCK CUPLA 200, ROTARY LINE CUPLA or ROTARY PLUG. Like those, TWIST PLUG is one-way shut-off; where both sides of the line have to close, COMPACT ZEROSPILL CUPLA with two-way shut-off at 1.0 MPa {10 kgf/cm2} is the alternative.

Body and seal materials

Applications

• Hand held equipment that is turned while in use
• Hose lines on moving tools
• Assembly benches with frequent device changes
• Maintenance work with changing connection points

Safety and application notes

• Not suitable for vacuum application in either connected or disconnected condition.
• Before use, please be sure to read "Safety Guide" described at the end of this book and "Instruction Sheet" that comes with the products.

All technical data on this page is taken from the Nitto Kohki general catalogue Quick Connect Couplings C01en-b, page 64. The complete catalogue is available for download on this page.