Connecting cable 2.5 m with rectangular plug H and single cores - Festo KAB H 2,5
A valve is only fitted once the electrical side is done as well. This 2.5 m cable already carries the rectangular plug H in the 6.7 x 4.2 pattern and ends in two open cores that can be wired straight to a terminal or controller.
- Two single cores of 0.17 mm², the standard version of this range
- Cable length 2.5 m, pre-assembled and ready to use without rework
- Rectangular plug H with 6.7 x 4.2 pattern for connecting Festo valves
- Clear core identification, pin 1 red and pin 3 black
- Rated for up to 60 V DC and 3 A, degree of protection IP 40
Technical data
| Type designation | KAB H 2,5 |
| Cable length | 2.5 m |
| Connection | Rectangular plug H (6.7 x 4.2) |
| Opposite end | 2 open cable ends |
| Cable | 2 x 0.17 mm² as single cores |
| Core assignment | Pin 1 red, pin 3 black, pin 2 not assigned |
| Voltage | max. 60 V DC |
| Current | max. 3 A |
| Degree of protection | IP 40 |
| Temperature range | -5 °C to +60 °C |
The cable is mainly used for connecting Festo valves. The version with two single cores is the standard choice. For purely static installation the two-core PUR cable is available as an alternative.
| Weight | 0.018000 |
|---|---|
| Manufacturer | Festo |
| Hersteller-Nr | KAB H 2,5 |
| Zolltarifnummer | 85444290 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Series | KAB |