Collar drill bushing DIN 172 form B, bore 26 mm, length 36 mm, collar 39 mm, hardened steel

With a bore of 26 mm and an overall length of 36 mm, this bushing keeps the tool on track inside the drilling jig. The collar of 39 mm diameter and 5.0 mm height bears on the drill plate and secures the bushing against axial slipping.

Benefits

• Guiding length of 36 mm, medium design
• Press fit of 35 mm outside diameter in the holder of the jig
• Ground guiding bore of 26 mm within the tolerances of DIN 172
• Form B design of DIN 172 with the bore rounded on both sides, also for a reversed fit
• All-round collar of 39 mm diameter and 5.0 mm height acting as a stop
• Hardened case-hardening steel at 740 ± 80 HV 10 with a ground surface

Applications

It is used wherever holes of 26 mm have to be produced without centre punching and without wandering, for example in jigs for series parts, in assembly gauges or in prototype work.

Standard and material

The basis is DIN 172, form B, with a guiding bore of 26 mm. In form B the bore is rounded on the opposite side as well. The material is case-hardening steel, hardened to 740 ± 80 HV 10 and ground afterwards.