Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
Places holes of 2.4 mm without wandering and holds the position throughout the batch. The bushing of the medium series guides the tool over 9 mm and the 8 mm collar rests on the drill plate. The material is hardened case-hardening steel, form A.
Collar drill bushing form A to DIN 172, bore 2.4 x 9 mm, collar 8 mm, case-hardening steel
FLUIDICS EQUIPMENT
Original product
Net price (excl. VAT)
€4.98
Item
FL-753852
Manufacturer no.
172-2,4X9-A
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.172-2,4X9-A
EAN4050571986407
Customs tariff number73269098
ConditionNew
Artikel
FL-753852
Frequently Bought Together
With a bore of 2.4 mm and an overall length of 9 mm, this bushing keeps the tool on track inside the drilling jig. The collar of 8 mm diameter and 2.0 mm height bears on the drill plate and secures the bushing against axial slipping.
Benefits
- Form A to DIN 172, the bore is rounded on the collar side so the tool enters easily
- Bore 2.4 mm, ground and dimensionally accurate to DIN 172
- Overall length 9 mm in the medium series
- Outside diameter 5 mm for the press fit in the drill plate
- Collar 8 mm with 2.0 mm height for axial location
- Case-hardening steel, hardened to 740 ± 80 HV 10 and ground
Technical data
| Property | Value |
|---|---|
| Bore diameter D1 | 2.4 mm |
| Overall length L1 | 9 mm |
| Series | medium |
| Outside diameter D2 | 5 mm |
| Collar diameter D3 | 8 mm |
| Collar height L2 | 2.0 mm |
| Bore design | rounded on one side (form A) |
| Material | case-hardening steel, hardened and ground |
| Hardness | 740 ± 80 HV 10 |
| Standard | DIN 172 form A |
Applications
It is typically fitted into the drill plates of jigs in mechanical engineering, contract manufacturing and mould making, where the same 2.4 mm hole is produced again and again in the same place.
Standard and material
The basis is DIN 172, form A, with a guiding bore of 2.4 mm. In form A the bore is rounded only on the side of the collar. The material is case-hardening steel, hardened to 740 ± 80 HV 10 and ground afterwards.
| Weight | 0.001500 |
|---|---|
| Manufacturer | Fluidics equipment |
| Hersteller-Nr | 172-2,4X9-A |
| EAN | 4050571986407 |
| Zolltarifnummer | 73269098 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Bauform | mittel |
| Bauform Bohrung | einseitig abgerundet (Form A) |
| Norm | DIN 172 |
Customers Who Bought This Item Also Bought
