Proportional Directional Valve 4WREE10E1-25-3X/M/24F1 - Bosch Rexroth R901581295

Two demands meet in this version, fine infeed and secure holding. The 25 l/min nominal flow sets the resolution, while spool symbol E1 blocks all four ports in mid position and holds the load hydraulically. Up to 180 l/min maximum flow and 350 bar operating pressure are available, and the valve is sealed with NBR.

Benefits

• 25 l/min nominal flow for fine infeed, up to 180 l/min maximum flow
• Spool symbol E1 blocks all four ports in mid position and holds the load hydraulically
• 4...20 mA command value through a 7-pole connector (6 + PE) to EN 175201-804
• NBR seals for HL hydraulic fluid, 7.27 kg unit weight
• Operating pressure up to 350 bar, hole pattern ISO 4401-05-04-0-05 in size 10
• Digital electronics at the valve, 24 VDC supply, UKCA conformity for EMC SI2016/1091

Application

The valve is intended for clamping, gripping and infeed axes that must keep a position even with the pump stopped. A current command allows greater distance between cabinet and valve. Direct actuation means short internal travel and no separate pilot circuit.

Manufacturer

Bosch Rexroth lists this valve under material number R901581295.