Proportional Directional Valve 4WRPEH10C5B50L-3X/V/24A1 - Bosch Rexroth R901568704

Smaller cylinders run restlessly when the valve is sized too generously. The 4WRPEH10C5B50L-3X/V/24A1 therefore uses 50 l/min nominal flow in size 10 and corrects the spool position internally, at 350 bar maximum operating pressure.

Benefits

• 50 l/min nominal flow, suited to axes that need fine resolution rather than large volume.
• Internal spool position feedback with on-board electronics on the valve.
• 350 bar maximum operating pressure, mounting pattern ISO 4401-05-04-0-05, spool symbol C5.
• Command value input plus and minus 10 V at 24 VDC through a 7-pole connector (6 + PE) to EN 175201-804.
• FKM seals, HL hydraulic fluid, 6.76 kg, CE conformity.

Technical data

Applications

The valve is used on feed, positioning and test axes that work with moderate oil volumes and still have to be closely controlled. The setpoint arrives as a voltage signal straight from the controller. In plants with several axes it can be combined with the 100 l/min variant of the same series.

Manufacturer

Bosch Rexroth, material number R901568704. Characteristic curves, port dimensions and signal assignment are given in the valve data sheet.