Proportional Directional Valve 4WRPEH10C4B100P-3X/V/24F1 - Bosch Rexroth R901566238

The 4WRPEH10C4B100P covers the range around 100 l/min nominal flow and passes peaks of 120 l/min maximum flow at up to 350 bar operating pressure. Four switching positions to spool symbol C4 add a further defined state alongside the two working directions. The electronics sit on the valve and process the command value as a 4...20 mA current signal.

Benefits

• 100 l/min nominal flow with 120 l/min maximum flow in size 10
• Operating pressure up to 350 bar, subplate mounting to ISO 4401-05-04-0-05
• Spool symbol C4 with four switching positions and four ports
• 4...20 mA command value through a 7-pole connector (6 + PE) to EN 175201-804, 24 VDC supply
• Direct actuation with internal spool position feedback, no pilot circuit needed
• FKM seals for HL hydraulic fluid, 6.72 kg unit weight, CE conformity

Application

The valve goes into feed axes, clamping and positioning circuits on machine tools, test rigs and forming plant with a medium oil demand. A 4...20 mA current signal resists voltage drop on long cable runs and shows a broken wire as a reading below 4 mA. The standard size 10 hole pattern allows a swap against existing valves on the same subplate.

Manufacturer

Bosch Rexroth lists this valve under material number R901566238.