Proportional Directional Valve 4WRPFH6C3B40P-3X/M00/24TD90 - Bosch Rexroth R901552608

Spool choice decides how an axis behaves at the end stops as well as in mid position. This direct actuated size 6 valve uses symbol C3, converts 40 l/min nominal flow and hangs on the controller over EtherCAT, at operating pressure up to 350 bar.

Benefits

• Spool symbol C3 with 4 switching positions as the alternative to C4 in the same ISO 4401-03-02-0-05 pattern.
• Digital command transfer over EtherCAT, 24 VDC supply at a 7-pole connector (6 + PE) to EN 175201-804.
• 40 l/min nominal flow against 50 l/min maximum flow, mass 3.5 kg.
• Direct actuation with a linear curve plus fine control range, no pilot circuit of its own.
• NBR seals for hydraulic fluid class HL, conformity UKCA.

Technical data

Applications

Applications include positioning axes on assembly lines, machine tools and test rigs. Because both spool variants share the same mounting standard, a C4 valve can be swapped for this C3 valve without reworking the manifold. Operating pressure stays at 350 bar in either case.

Manufacturer

Bosch Rexroth, material number R901552608. Conformity UKCA, electromagnetic compatibility (EMC) to SI2016/1091.