Pressure Reducing Valve 3DREA6-2X/315G24K31A1M - Bosch Rexroth R901552539

A 0...10 V voltage command lets the controller set the pressure at port A, and the valve maintains it at flows of up to 60 l/min. At 3.58 kg it is the heavier of the two command variants of this design and bolts directly onto a subplate.

Benefits

• 0...10 V voltage command for connection to common analog cards
• Control at flows of up to 60 l/min with a maximum operating pressure of 350 bar
• Subplate mounting to ISO 4401-03-02-0-05 with two switching positions
• On-board electronics, 7-pole (6 + PE) plug to EN 175201-804
• Weight of 3.58 kg, NBR seals, HL hydraulic fluid

Applications

The valve goes into circuits where one consumer stays permanently at reduced pressure, for instance counterholders or pre-tensioning devices. The command can be changed during operation, so one machine can run several set-ups. The subplate is not part of the delivery and is chosen from the size 6 hole pattern.

Manufacturer

Bosch Rexroth lists the valve under material number R901552539 as 3DREA6-2X/315G24K31A1M.