Proportional Directional Valve 4WRDE10E100L-6X/MPY/24A1 - Bosch Rexroth R901520684

When an axis has to block all four ports in centre, spool symbol E is the way. The 4WRDE10E100L-6X in size 10 delivers that, controls 100 l/min nominal flow through internal spool position feedback and allows up to 170 l/min total flow.

Benefits

• Spool symbol E blocks all ports in centre, so the load stays put if the signal fails.
• 100 l/min nominal flow and 170 l/min maximum flow at 350 bar operating pressure.
• Internal pilot oil supply with external drain suits back pressure in the return.
• A ±10 V command value through on-board electronics connects straight to a controller output.
• At 5 kg the valve is clearly lighter than comparable size 10 builds.
• NBR seals and connection diagram ISO 4401-05-05-0-05.

Application

The valve suits positioning and infeed axes in machine tools and handling modules where the load has to be held at rest. Its low mass allows mounting right at the consumer and therefore short oil paths. Before swapping against the MXY build, check the pilot oil routing.

Manufacturer

Bosch Rexroth, material number R901520684.