Proportional Directional Valve 4WRLE16V250L-4X/MPT/D24F1 - Bosch Rexroth R901499059

Not every plant needs FKM. Where classic HL mineral oil sits in the tank and the controller is far away, the 4WRLE16V250L-4X/MPT/D24F1 fits, with NBR seals and a 4...20 mA current command, at 250 l/min nominal flow and 350 bar operating pressure.

Benefits

• NBR seals are matched to HL mineral oil based hydraulic fluid.
• A 4...20 mA current command survives long cable runs and makes a broken wire visible.
• 250 l/min nominal flow and up to 800 l/min maximum flow at 350 bar.
• Spool symbol V across three switching positions and four ports, ISO 4401-07-07-0-05 mounting pattern.
• On-board electronics, 24 VDC supply, 12.36 kg valve mass, CE conformity.

Application

Intended for presses, lifting gear and test rigs on ordinary mineral oil hydraulics. A current command suits runs of several metres between cabinet and valve. At 12.36 kg this is one of the heavier versions in size 16.

Manufacturer

Bosch Rexroth lists this valve under material number R901499059. Electrical connection is a 7-pole connector (6 + PE) to EN 175201-804.