Pressure Reducing Valve DREME20-6X/100YMG24K31A1V - Bosch Rexroth R901485945

Where a partial circuit needs less pressure than the pump delivers, the reduction has to follow the command value rather than the load. This size 25 proportional pressure reducing valve sets outlet pressure from a 0...10 V analog signal and passes up to 300 l/min, at 315 bar maximum operating pressure.

Benefits

• 0...10 V command value, the controller sets reduced pressure steplessly
• 300 l/min maximum flow in size 25, ISO 5781 interface
• 315 bar maximum operating pressure, 3 ports and 2 switching positions
• FKM seals matched to HL hydraulic fluid
• On-board electronics, 24 VDC supply through a 7-pole (6 + PE) plug to EN 175201-804
• UKCA conformity, electromagnetic compatibility (EMC) to SI2016/1091

Applications

Clamping and feed circuits, presses and test benches that run a secondary circuit at a defined pressure are typical applications. Spool symbol B to A fixes the direction of reduction. The ISO 5781 subplate interface keeps replacement short during service.

Manufacturer

Manufactured by Bosch Rexroth under material number R901485945. Characteristic curves and installation dimensions are given in data sheet RE 29276 and RE 07600-B.