Proportional Directional Valve 4WRLE16V250L-4X/MXY/D24A1 - Bosch Rexroth R901467116

An existing analogue control loop should stay in service while the valve is replaced. The 4WRLE16V250L-4X/MXY/D24A1 takes the command unchanged as ±10 V, meters 250 l/min nominal flow at 350 bar operating pressure and needs no extra amplifier.

Benefits

• ±10 V command at the on-board electronics, so no signal converter is required.
• 250 l/min nominal flow and up to 800 l/min maximum flow at 350 bar operating pressure.
• NBR seals, designed for HL mineral oil based hydraulic fluid.
• Spool symbol V with three switching positions across four ports, ISO 4401-07-07-0-05 mounting pattern.
• Valve mass 12.02 kg, 24 VDC supply, CE conformity.

Application

Useful when replacing older control valves in presses, clamping systems and test rigs with analogue equipment. Size 16 and the standard mounting pattern allow a swap without changing the manifold. For fast return strokes the 800 l/min reserve is available.

Manufacturer

Bosch Rexroth lists this valve under material number R901467116. Seals are NBR, and electrical connection uses a 7-pole connector (6 + PE) to EN 175201-804.