Accumulator Assembly ABSBG-2X/B32,0N-CE /30E210G 24V/A6M DC - Bosch Rexroth R901463351

Anyone installing a bladder accumulator has to add a shut-off block, a safety valve and a pressure gauge anyway. The accumulator assembly ABSBG-2X/B32,0N-CE /30E210G 24V/A6M DC supplies that unit ready mounted on a console and works at a maximum operating pressure of 210 bar with up to 900 l/min.

Benefits

• Bladder accumulator of 32.0 litres in CE conformity, mounted ready on the console.
• Accumulator shut-off block NG6 with a type-examination tested pressure valve to Directive 2014/68/EU, set to 210 bar.
• Up to 900 l/min through ports P = G1 1/2 and T = G1/2.
• Manual unloading with a valve for 24 VDC.
• Pressure gauge with red marking, the permitted range can be read off without looking anything up.
• 139 kg assembly weight with FKM seals for HL hydraulic fluid.

Applications

The assembly supplies circuits with short, high volume demands, for example on presses, clamping systems and test rigs, and at the same time damps pressure surges. Because shut-off block and safety valve are already matched, sizing these parts separately is no longer needed. Electrical connection is through a 3-pole connector (2 + PE) to EN 175301-803.

Manufacturer

Bosch Rexroth lists the accumulator assembly ABSBG-2X/B32,0N-CE /30E210G 24V/A6M DC under material number R901463351. The pressure valve of the shut-off block is type-examination tested and the assembly carries CE conformity.