Proportional Directional Valve 4WRPE10V50S-3X/M/24F1 - Bosch Rexroth R901436338

Where the valve sits far away from the cabinet, a voltage line degrades sooner than a current loop. The 4WRPE10V50S-3X/M/24F1 therefore uses a 4...20 mA setpoint and controls a nominal flow of 50 l/min in size 10.

Benefits

• 4...20 mA command value, a broken line shows up in the signal itself and induced noise barely matters.
• 50 l/min nominal flow, up to 280 l/min throughput, spool symbol V gives a fine characteristic around centre position.
• On-board electronics with spool position feedback, the valve closes its own position loop and needs no amplifier card.
• 350 bar maximum operating pressure on the ISO 4401-05-04-0-94 pattern in size 10.
• 7-pole connector (6 + PE) to EN 175201-804, supply and signal share one plug connection.

Technical data

Applications

The valve serves feed and lift axes in presses, on casting plants and on testing machines with larger cylinder volumes. A current signal suits installations that run frequency converters and long cable routes. NBR seals and HL fluid keep it inside the usual industrial range.

Manufacturer

Bosch Rexroth, material number R901436338. Genuine new part carrying CE conformity, electronics calibrated at the factory.