Proportional Directional Valve 4WRPDH10C5B50L-2X/M/24ND6T - Bosch Rexroth R901426772

Size 10 and 315 bar operating pressure produce a high power density on a mounting pattern only a few centimetres across. The 4WRPDH10C5B50L-2X/M/24ND6T exploits it with 50 l/min nominal flow and spool symbol C5.

Benefits

• Operating pressure up to 315 bar in compact size 10 to ISO 4401-05-04-0-05.
• Nominal flow 50 l/min, spool symbol C5 for consumers with an area ratio.
• Mass 7.32 kg, four ports, four switching positions.
• Direct actuated with internal spool position feedback, without a pilot circuit.
• On-board electronics for ±10 VDC or 4 ... 20 mA, 24 VDC supply.
• 12-pole connector (11 + PE), NBR seals, HL hydraulic fluid.

Applications

The valve is used in compact power units where the control section may take up little room. A high permitted pressure allows smaller cylinder bores at the same force. During sizing the performance limit of the valve has to be observed.

Manufacturer

Bosch Rexroth, material number R901426772. The performance limit curve and installation dimensions are in the 4WRPDH series data sheet.