Pumpensicherheitsblock DBAW30BH2-2X/230Z6EG24N9K4A00E - Bosch Rexroth R901410230

Building relief and unloading as two separate parts means two sets of piping and two possible leak points. This block combines them, holds pressure within 6 to 230 bar and passes 300 l/min through the high-pressure flange.

Benefits

• Pressure stage 6 to 230 bar on a pilot-operated valve of poppet seat design, maximum operating pressure 350 bar.
• Flow up to 300 l/min in size 32 with 2 ports.
• Unloading through a built-on directional spool valve at 24 VDC with 2 switching positions.
• 8.16 kg weight connected by high-pressure flange, spool symbol B.
• NBR seals for HL hydraulic fluid, 3-pole connector (2 + PE) to EN 175301-803.
• CE conformity, pressure set through an internal hexagon with protective cap.

Technical data

Application

The block belongs at the pump outlet of power units in presses, test rigs and clamping systems. During start-up the drive motor stays unloaded because the built-on directional spool valve opens the circuit to tank. Once the motor is up to speed the 230 bar stage takes over protection.

Manufacturer

Bosch Rexroth, material number R901410230, type designation DBAW30BH2-2X/230Z6EG24N9K4A00E. Characteristic curves and installation dimensions are given in the Bosch Rexroth series documentation.