Pumpensicherheitsblock DBAW25BF2-2X/100-6EG24N9K4A08VE - Bosch Rexroth R901406650

Immediately downstream of the pump, pressure has to be limited and the circuit unloaded during start-up. This size 25 pump safety block handles both in one housing, processes flow up to 300 l/min and is rated for a maximum operating pressure of 350 bar.

Benefits

• Pressure limiting and electrical unloading in one block, mounted directly on the pump.
• Flow up to 300 l/min, maximum operating pressure 350 bar.
• Flange connection in size 25 for mounting on the pump outlet.
• Supply voltage 24 VDC, Connector, 3-pole (2 + PE) to EN 175301-803.
• FKM seals, HL hydraulic fluid, CE conformity.
• Weight 5.9 kg.

Application

The block is used on hydraulic power units where the motor should start against an unloaded circuit while system pressure is also capped. The flange connection allows direct mounting on the pump outlet, which removes the need for separate piping.

Manufacturer

Bosch Rexroth lists the block under material number R901406650. Setting range, characteristic curves and mounting dimensions are held by the manufacturer for this build.