Directional Spool Valve 4WEH16J7X/6EG48N9K4/B10 - Bosch Rexroth R901395027

The solenoid coil of the 4WEH16J7X/6EG48N9K4/B10 is rated for 48 VDC and is wired through a connector, 3-pole (2 + PE) according to EN 175301-803. Hydraulically, the pilot-operated size 16 valve distributes up to 300 l/min following spool symbol J.

Benefits

• Control voltage 48 VDC for plants running that level in the switchgear.
• Connector, 3-pole (2 + PE) according to EN 175301-803 for pre-assembled cable.
• Spool symbol J in three switching positions across four ports.
• Flow of up to 300 l/min at an operating pressure of no more than 280 bar.
• Weight of 9.7 kg with NBR seals for HL hydraulic fluid.

Application

The coil voltage has to match the existing control system, since a 24 volt solenoid cannot be run on 48 VDC. When swapping a valve, coil voltage therefore belongs on the checklist next to spool symbol and size. Pilot oil is supplied and drained externally in this version.

Manufacturer

Manufactured by Bosch Rexroth, product family H-4W.H.., material number R901395027. Coil data, power consumption and characteristic curves are given in the data sheet Directional spool valves, pilot-operated (RE 24751), with accessories in Hydraulic valves and hydro- (RE 07600-B).