Pressure Relief Valve DBW30BG2-5X/315U6EG12N9K4V/12 - Bosch Rexroth R901393623

A threaded connection allows installation straight into a line, for instance when protection is added later and no valve block exists. Pressure is limited in a pilot-operated seat and an internal hexagon under a protective cap takes the setting.

Benefits

• Threaded connection for installation into the line without a subplate
• Adjustment range 2 to 315 bar at an operating pressure of 350 bar maximum
• Flow up to 650 l/min in size 32
• Solenoid unloading through a built-on directional spool valve at 12 VDC
• Spool symbol B, FKM seals, mass 6.49 kg

Application

The valve protects line sections in power units that were extended after commissioning. At 12 VDC it matches controls on a low board voltage, as found on mobile plant. The solenoid stage takes the section off pressure as soon as it is not needed.

Manufacturer

Bosch Rexroth assigns material number R901393623 to this valve of the DB.10-30 product family. Data sheet RE 25802 describes the series and RE 25802-B adds further detail.