Proportional Directional Valve 4WRPE10V80S-3X/M/24A1 - Bosch Rexroth R901392641

When a heavy load starts to move, little oil should flow, and much of it while travelling. The 4WRPE10V80S-3X/M/24A1 maps that difference into its characteristic, linear around centre and progressive towards the ends, at 80 l/min nominal flow.

Benefits

• Progressive flow characteristic with a linear fine control range, approach and rapid travel run inside the same setpoint span.
• 80 l/min nominal flow, up to 390 l/min, sized for cylinders with large swept volume.
• ±10 V command value input, wired straight to an analog card of the controller.
• On-board electronics, spool position feedback, control sits on the valve and works without an external card.
• 350 bar maximum operating pressure, 7.8 kg, ISO 4401-05-04-0-94 pattern in size 10.

Technical data

Applications

The valve is used where loads have to start gently and then travel quickly, on lift tables, on tipping gear and on presses with a long return stroke. The linear fine range helps during setup, because small setpoint changes act evenly there. HL fluid is intended for operation.

Manufacturer

Bosch Rexroth, material number R901392641. Genuine new part, CE conformity, supply 24 VDC.