Directional Spool Valve 4WE10M5X/EG205N9K4/B10M - Bosch Rexroth R901369085

Mounted on a manifold with subplate mounting to ISO 4401-05-04-0-05, the valve decides which way the oil travels to the actuator. Three switching positions to spool symbol M are actuated directly by solenoid, without a pilot stage, covering flows up to 75 l/min at 350 bar.

Benefits

• 75 l/min flow at a maximum operating pressure of 350 bar, matched to size 10 power units.
• Three switching positions to spool symbol M across four ports, direct solenoid actuation.
• Solenoids rated 205 V DC, wired through a 3-pole connector (2 + PE) to EN 175301-803.
• NBR seals for HL hydraulic fluid, installed weight 5.5 kg.

Application

The usual place is the manifold of a press, a clamping fixture or lifting gear, wherever a double-acting cylinder has to extend and retract. Subplate mounting to ISO 4401-05-04-0-05 lets you swap in an equally dimensioned valve without touching the piping. UKCA conformity to the Low-Voltage Directive SI2016/1091 is declared.

Manufacturer

The valve belongs to product family WE10../E. Bosch Rexroth lists the item under material number R901369085. Full characteristic curves and installation dimensions are given in data sheet RE 23340 and in overview RE 07600-B.