Pumpenregelsystem SYDFEE-2X/018R-PSC12N00-0000-C2B0VX3 - Bosch Rexroth R901367976

Controlling swivel angle and pressure on a variable pump calls for pump, measuring technology and electronics matched to one another. The SYDFEE-2X/018R-PSC12N00-0000-C2B0VX3 pump control system combines them in one size 18 cm³ unit that supplies up to 59 l/min at a maximum operating pressure of 280 bar.

Benefits

• Size 18 cm³ with up to 59 l/min - variable displacement for power units in the medium output bracket.
• Maximum operating pressure 280 bar - rated for systems running HLP hydraulic fluid.
• On-board electronics - swivel angle and pressure control sit on the unit, only the analog command value at 24 VDC has to be wired.
• 12-pole connector (11 + PE) to EN 175201-804 - supply and signal through one standardised plug.
• Geared shaft (S) on an ISO 2-hole flange - clockwise rotation, built without through-drive.
• FKM seals - material for permanently warm mineral oil, weight 18.8 kg.

Technical data

Applications

The unit suits power packs whose pressure reaches the full 280 bar and whose controller puts out an analog command value. Presses, clamping circuits and continuously running test rigs are typical. At 18.8 kg with an ISO 2-hole flange it mounts on a standard bell housing. No through-drive is provided for a second pump.

Manufacturer

Made by Bosch Rexroth, material number R901367976. Characteristic curves, dimensions and connection data are given in data sheet RD 30030 for the pressure and flow control system.