Pressure Relief Valve DBW20B2-5X/325-6EG24N9K4E - Bosch Rexroth R901359099

For circuits that work permanently above 300 bar, the setting range of this version runs from 4 to 325 bar. The margin to the 350 bar maximum operating pressure is therefore narrow, so the cut-off point has to be matched to the weakest component in the circuit. The pilot-operated poppet valve discharges up to 400 l/min across the ISO 6264-08-13 subplate interface.

Benefits

• Setting range 4 to 325 bar for permanently high working pressures
• Pilot-operated poppet valve in size 25, flow up to 400 l/min
• Subplate mounting to ISO 6264-08-13, spool symbol B
• Internal hexagon with protective cap keeps the setting covered
• Solenoid actuation at 24 VDC, 3-pole connector (2 + PE) to EN 175301-803
• 5.4 kg mass, NBR seals for HL hydraulic fluid

Application

The place for this valve is the high pressure circuit of a press, a forging line or a test rig. Poppet seat design keeps leakage low in the closed position, which limits oil heating under continuous high pressure. Solenoid actuation switches the circuit without touching the value that was set.

Manufacturer

Bosch Rexroth lists this pressure relief valve DBW20B2-5X/325-6EG24N9K4E under material number R901359099. Data sheets RE 25802 and RE 25802-B carry the characteristic curves, the installation dimensions and the subplate data. After setting the valve, check that hoses and fittings in the circuit are released for the chosen cut-off pressure.