Directional Spool Valve 5-4WE10X7-5X/EG24N9K4QMAG24/M - Bosch Rexroth R901349718

Operating pressure up to 350 bar at 150 l/min marks the working range of this version, covering the upper edge of what size 10 delivers. The spool with symbol X7 works in two switching positions across four ports. Control is direct, without a pilot stage, at 24 VDC through a 3-pole connector (2 + PE) to EN 175301-803.

Benefits

• Maximum operating pressure of 350 bar at up to 150 l/min
• Spool symbol X7 in two switching positions on four ports
• Directly operated, therefore independent of any pilot pressure
• Subplate mounting to ISO 4401-05-04-0-05, size 10
• Solenoid actuation at 24 VDC, 3-pole connector (2 + PE) to EN 175301-803
• Mass 4.3 kg, NBR seals for HL hydraulic fluid

Technical data

Application

It belongs in circuits where system pressure reaches towards 350 bar and simple two-position logic is still all that is wanted. With no pilot stage involved, the valve switches even when the circuit was unpressurised a moment earlier. The ISO 4401-05-04-0-05 subplate is widely available in the field.

Manufacturer

Bosch Rexroth lists this directly operated directional valve 5-4WE10X7-5X/EG24N9K4QMAG24/M under material number R901349718. When replacing a valve, check the full type designation, since versions in this series differ in solenoid arrangement.