Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
Controls flow and pressure right at the pump instead of through a throttle in the circuit. This unit with 18 cm³ of displacement delivers up to 59 l/min at operating pressures to 280 bar and carries its control electronics on the housing. Setpoints arrive as analog signals on a 24 VDC supply.
Pumpenregelsystem SYDFEE-2X/018R-PPA12N00-0000-C2A0VXX - Bosch Rexroth R901270841
BOSCH REXROTH
Original product
Net price (excl. VAT)
€7,677.16
Item
BRR-R901270841
Manufacturer no.
R901270841
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.R901270841
Country of originGermany
ConditionNew
Artikel
BRR-R901270841
Frequently Bought Together
-
This Item:
€7,677.16
-
Motor-Pumpen-Verbindungsbausatz ABZPZ-FD3X/V1 -200/0-A4VSO 71PB/DH-AL/K - Bosch Rexroth R901532212
€734.37
-
Motor-Pumpen-Verbindungsbausatz ABZPZ-S 3X/B35- 80/0-AZPF-CB/DH-AL/R - Bosch Rexroth R901447084
€109.20
Total price
A variable pump delivers only as much oil as the axis is taking, which avoids the throttling losses of a constant flow circuit. The 18 cm³ SYDFEE controls swivel angle and pressure up to 280 bar through its own electronics.
Benefits
- Variable pump with 18 cm³ displacement delivers up to 59 l/min
- Pressure control up to 280 bar operating pressure without throttling losses at a valve
- On-board control electronics on a 24 VDC supply with an analog command interface
- Wired through Connector, 12-pole (11 + PE), master and slave operation of several units is possible
- Clockwise rotation, fitting key shaft, ISO 2-hole mounting flange
Technical data
| Direction of rotation | clockwise rotation |
| Displacement type | variable |
| Max. flow | 59 l/min |
| Product family | SYDFEE |
| Through-drive | without |
| Supply voltage | 24 VDC |
| Connectivity | Analog |
| Hydraulic fluid | HLP |
| Shaft end | Fitting key shaft |
| Electrical connection description | Connector 12-pole (11 + PE) according to EN 175201-804 |
| Operating pressure, max. | 280 bar |
| Size | 18 cm³ |
| Seals | FKM |
| Mounting flange | ISO 2-hole |
| Electrical connector | Connector, 12-pole (11 + PE) |
| Controls | On-board electronics |
| Weight | 15.5 kg |
Applications
The system serves injection moulding machines, presses and test rigs where holding phases and rapid strokes alternate. Because the pump swivels back during holding, power loss drops and the oil cooler can be smaller. The link to the machine control runs as an analog signal through the 12 pole connector.
Manufacturer
Bosch Rexroth lists this product under material number R901270841. Every figure on this page comes from the manufacturer data, complete characteristic curves are in data sheet RD 30030.
| Hersteller-Nr | R901270841 |
|---|---|
| Manufacturer | Bosch Rexroth |
| Country of Manufacture | Germany |
| Weight | 15.500000 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikel-Authentizität | Original product |
| Artikelzustand | New |
| Position sensing | No |
Customers Who Bought This Item Also Bought
