Pumpenregelsystem SYDFEE-2X/018R-PPA12N00-0000-C0A0EXX-002 - Bosch Rexroth R901217145

The C0A0EXX-002 version is intended for grouped operation, where several units work into a shared circuit. Each unit contributes 18 cm³ of displacement and up to 59 l/min.

Benefits

• The circuit works up to 280 bar, control runs over swivel angle instead of a throttle
• The controller sits on the pump, 24 VDC supply, analog interface
• Master and slave operation through Connector, 12-pole (11 + PE)
• Fitting key shaft and ISO 2-hole flange, clockwise rotation
• FKM seals, medium HLP, 15.5 kg

Technical data

Applications

Grouped operation pays off when the peak demand of a machine is far above its continuous demand, for example on large injection moulding machines. Units switched in run almost empty while idle and barely load the circuit. The drive is clockwise through a fitting key shaft on the ISO 2-hole flange.

Manufacturer

Bosch Rexroth lists this product under material number R901217145. Every figure on this page comes from the manufacturer data, complete characteristic curves are in data sheet RD 30030.