Pumpenregelsystem SYDFEE-2X/018R-PSC12KC1-0000-C0A0CXX - Bosch Rexroth R901211319

Setting flow with a throttle valve turns the difference into heat. This control system adjusts the swivel angle of the pump itself instead, delivers up to 59 l/min at operating pressures up to 280 bar and needs only an analogue signal at its on-board electronics.

Benefits

• Variable displacement of 18 cm³, flow up to 59 l/min.
• Operating pressure up to 280 bar, pressure control and swivel angle control in one unit.
• Through-drive fitted, so a second pump can be added without its own motor.
• On-board electronics with an analogue interface, 24 VDC supply.
• Geared shaft (S), ISO 2-hole mounting flange, clockwise rotation.
• FKM seals for HLP hydraulic fluid, weight 17.5 kg, 12-pole connector (11 + PE) to EN 175201-804.

Technical data

Applications

The system is used on machine tools, test benches and clamping hydraulics that alternate long holding phases with short movement phases. During the holding phase the pump swivels back and draws almost no power. The through-drive allows a second circuit on the same drive.

Manufacturer

Bosch Rexroth, material number R901211319. Product family SYDFEE, series 2X, control through on-board electronics. Further details are given in data sheet RD 30030.