Pumpensicherheitsblock DBAEE25BF2-2X/315G24K31A1A08 - Bosch Rexroth R901204062

This version uses the widespread 0 to 10 V voltage command, the same interface as most analogue outputs on a controller. It sits at the pump outlet, carries up to 400 l/min and keeps pressure from rising above 350 bar.

Benefits

• 0 to 10 V command value, directly compatible with common analogue output cards.
• 400 l/min at a maximum operating pressure of 350 bar, size 25.
• On-board electronics on 24 V DC, 7-pole connector (6 + PE) to EN 175201-804.
• Flange connection with two ports, NBR seals, 5.8 kg.

Application

Power units in presses, clamping systems and test equipment often run several pressure levels in sequence. This block handles the limiting and follows the signal from the control system. A single cable to the 7-pole connector is all the wiring it needs.

Manufacturer

The item comes from product family DBA.15,25,30. Bosch Rexroth lists the item under material number R901204062.