Directional Spool Valve 4WEH16HD7X/OF6EG24N9ETK4QMABG24/B10P4,5 - Bosch Rexroth R901199634

A cylinder that only shuttles between two end positions has no use for a middle position. This pilot-operated size 16 directional spool valve therefore works with two switching positions to symbol D, carries up to 300 l/min and is rated for an operating pressure of 280 bar.

Benefits

• Two switching positions to symbol D across four ports, matched to simple reversing movements
• Rated flow of 300 l/min at an operating pressure of 280 bar maximum
• Internal pilot oil supply and internal pilot oil return, so no extra pilot line is needed
• Pilot control on 24 VDC with a 3-pole connector to EN 175301-803
• Subplate mounting ISO 4401-07-07-0-05, NBR seals and a mass of 10.48 kg

Technical data

Applications

The valve controls lifting and clamping cylinders in presses, saws and steel processing lines. Two positions are enough there because the cylinder alternates between its end positions. The valve runs on HL fluid.

Manufacturer

Bosch Rexroth assigns the valve to the H-4W.H.. range. The Bosch Rexroth material number is R901199634. Characteristic curves and installation dimensions are given in data sheet RE 24751, with RE 07600-B as a supplement.