Proportional Directional Valve 4WRGE16V125L-1X/315G24EK31/C1M - Bosch Rexroth R901199169

Soft approach, clean positioning, full clamping force at the end: this pilot-operated proportional directional valve in size 16 handles 125 l/min nominal flow at 350 bar, internal spool position feedback keeping even small command steps steady in the fine range.

Advantages

• 125 l/min nominal flow suits mid-size cylinders without laying out the circuit for the full 460 l/min.
• Internal pilot oil supply removes the external X port, the return leaves depressurised.
• ±10 mA command value over a 7-pole connector to EN 175201-804, straight into the on-board electronics.
• Spool symbol V with internal position feedback keeps hysteresis low over service life.
• NBR seals plus HL hydraulic fluid match a standard mineral oil circuit.

Applications

Clamping units, ejectors, core pulls in injection moulding, plus handling axes of moderate flow demand. At 10.01 kg it stays easy to handle on a valve carrier. Route the external pilot oil return to tank free of back pressure.

Manufacturer

Bosch Rexroth, material number R901199169. Genuine manufacturer part, not a replica.