Proportional Directional Valve 3WRCBEE32VF380M-1X/G24K31/F1M - Bosch Rexroth R901174494

High flow rates inside a manifold are handled far more compactly by a cartridge valve than by a subplate valve. The size 32 3WRCBEE controls 380 l/min nominal flow at 315 bar operating pressure and works with internal position feedback of the spool.

Benefits

• 380 l/min nominal flow and up to 1000 l/min maximum flow from a single cavity.
• Internal position feedback of the spool holds the setting even under changing load.
• Inflected characteristic curve, progressive with a linear fine control range, for gentle approach and fast stroke.
• 4...20 mA command stays accurate over long lines and shows a broken cable.
• 315 bar operating pressure with three ports and three switching positions.
• On-board electronics at the valve, 24 VDC supply through a 7-pole connector (6 + PE).

Technical data

Applications

The cartridge valve is used in control manifolds of presses, in hydro power and turbine control and on large test benches. Because it sits in a cavity, sandwich plates and long channel runs are avoided. It runs on HL hydraulic fluid with NBR seals.

Manufacturer

The manufacturer is Bosch Rexroth, material number R901174494.