Pumpenregelsystem SYDFE1-2X/028R-PRA12KC3-0479-C0X0XXX - Bosch Rexroth R901024329

A test rig that has to set swivel angle and pressure separately wastes power as heat across a throttle. The SYDFE1 control system in the PRA12KC3-0479-C0X0XXX version regulates the pump itself instead, working with an external pilot oil supply and a through-drive.

Benefits

• 28 cm³ displacement, up to 84 l/min, delivery and pressure are set at the swivel angle rather than at a restrictor.
• 280 bar maximum operating pressure, sized for continuous duty on presses, injection moulding machines and test benches.
• External pilot oil supply, the pilot flow is taken from the plant circuit, which is what a master and slave arrangement of several pumps needs.
• Through-drive fitted, a second pump can share the same motor without building up another drive train.
• Geared shaft (R) with ISO 2-hole flange, the motor interface follows the standard and is defined for clockwise rotation.
• Analog control at 24 VDC, the system connects to an existing controller without a fieldbus.

Technical data

Applications

The control system is used in power units for presses, injection moulding machines and materials testing rigs, where holding phases and rapid traverse call for very different flows. Regulating the swivel angle cuts the losses during holding phases, because no oil is dumped across a relief valve. In a master and slave group one unit leads and the others follow its setpoint.

Manufacturer

Bosch Rexroth, material number R901024329. Sizing data is given in data sheet RE 30011-B for pressure and flow control.