Proportional Directional Valve 4WRZE10W6-85-7X/6EG24N9ETK31/A1V - Bosch Rexroth R900978823

Core pulls and ejectors on an injection mould need gentle ramps at limited flow. The 4WRZE10W6-85-7X/6EG24N9ETK31/A1V meters 85 l/min nominal flow for that job at operating pressures up to 315 bar and feeds its pilot stage from the working circuit, no extra lines needed.

Benefits

• 85 l/min nominal flow, maximum flow 170 l/min in size 10.
• Internal pilot oil supply and internal pilot oil return, a manifold free of X and Y drillings.
• Spool symbol W6 with 3 switching positions and 4 ports.
• FKM seals for HL hydraulic fluid, 8.76 kg weight.
• ±10 V command value on the on-board electronics, 24 VDC on a 7-pole (6 + PE) connector to EN 175201-804.

Technical data

Applications

The valve drives mould movements on injection moulding and die casting machines as well as part removal axes. At 85 l/min acceleration and braking can be shaped through the command signal instead of letting the cylinder run into its end stops. FKM seals cope with permanently warm mould hydraulics.

Manufacturer

Bosch Rexroth, material number R900978823. Conformity UKCA, electromagnetic compatibility (EMC) SI2016/1091. Characteristic curves, step response and mounting dimensions are given in data sheet RE 29115, the overview in RE 07600-B.