Pumpenregelsystem SYDFEE-2X/028R-PRA12KD3-0000-A0A1VX2-006 - Bosch Rexroth R900751704

An extra motor costs floor space, cable and starting current. The pump control system SYDFEE-2X/028R-PRA12KD3-0000-A0A1VX2-006 avoids it, because its through-drive carries a second pump while its own variable unit of 28 cm³ controls up to 84 l/min at 280 bar.

Benefits

• Through-drive included, so a further pump runs without a drive of its own.
• 84 l/min at 280 bar from a variable unit of size 28 cm³ with clockwise rotation.
• Geared shaft (R) at the ISO 2-hole flange for the coupling to the motor.
• Swivel angle and pressure control through on-board electronics with an analog command value, preload valve at 250 bar.
• 24 VDC and a 12-pole connector (11 + PE) to EN 175201-804, with FKM seals for hydraulic fluid HLP.
• 25.3 kg weight, which keeps the mounting on compact power unit plates manageable.

Technical data

Applications

The combination of 28 cm³ and a through-drive fits power units that need one controlled main circuit and one simple secondary circuit, for example tool clamping next to the main axis. The unit also works as a slave inside a group of pumps. Controlled swivel angle keeps losses low when the secondary circuit draws oil only now and then.

Manufacturer

The manufacturer is Bosch Rexroth, material number R900751704. Characteristic curves and mounting notes are given in the data sheet for the pressure and flow control system, RD 30030.