Filling Valve SF125B1-1-4X - Bosch Rexroth R900513762

During the rapid stroke of a large press the cylinder chamber has to fill within seconds, otherwise the piston pulls a vacuum and the system cavitates. The SF125B1 prefill valve in size 125 opens a path for up to 3800 l/min between tank and cylinder and holds up to 350 bar once closed.

Benefits

• A filling flow of 3800 l/min comes straight from the tank, so the main pump never has to deliver that volume.
• Seat valve design closes without leakage, which is why the pressing pressure of up to 350 bar stands without make-up flow.
• Pre-decompression releases the trapped pressure before opening and takes the shock out of the system.
• Hydraulic actuation works without a solenoid and without any electrical supply.
• Tank installation to ISO 228-1 saves the pipework between tank and cylinder.
• Two switching positions, four ports, NBR seals for hydraulic fluid HL, mass 61 kg.

Applications

The valve is built for large-volume cylinders as found in deep-drawing presses, forging presses and injection moulding machines. It sits on the tank above the cylinder and works in the change between rapid stroke and pressing stroke. At 61 kg it belongs on a load-bearing bracket, never on a pipe run.

Manufacturer

Bosch Rexroth builds this valve under material number R900513762. Quote that number when ordering and keep it in the spare parts list of the machine.