Drill bush DIN 179 form B, short type, bore 9 mm, length 12 mm, outside dia 15 mm

With a guide bore of 9 mm this bush to DIN 179 accepts the drill and supports it over 12 mm of length. In form B the bore is rounded on both sides, and the seat in the jig measures 15 mm.

Benefits

• Outside diameter of 15 mm as a ground seat in the drill plate
• Guide bore of 9 mm to DIN 179 for the matching tool
• Bore rounded on both sides to form B, so the bush can be fitted either way round
• Overall length of 12 mm in the short version of the range short, medium and long
• Guide length of about 1.3 drill diameters at 12 mm of length

Applications

• Fixed drill plates and hinged drilling jigs
• One-off and small batch production in mechanical engineering
• Drilling fitted holes on assemblies with a fixed hole position
• Inspection and marking templates in assembly

Standard and material

The design corresponds to DIN 179, form B. Case-hardening steel at 740 ± 80 HV 10 together with ground surfaces determines the service life of the bush.