Drill bush DIN 179 form B, medium type, bore 9.7 mm, length 20 mm, outside dia 15 mm

Made of hardened special case-hardening steel, this bush accepts drills of 9.7 mm and holds them on axis over 20 mm of length. The outside diameter of 15 mm forms the ground seat, and the bore is rounded on both sides to DIN 179 form B.

Benefits

• Bore rounded on both sides to form B, so the bush can be fitted either way round
• Overall length of 20 mm in the medium version of the range short, medium and long
• Guide bore of 9.7 mm to DIN 179 for the matching tool
• Dimensions to DIN 179, so existing bushes can be replaced size for size
• Outside diameter of 15 mm as a ground seat in the drill plate

Applications

• Drilling jigs and drill templates in series production
• Jig and tool making
• Repeatable hole patterns in sheet metal, profiles and housings
• Maintenance work where hole patterns are reworked

Standard and material

The basis is DIN 179 for cylindrical drill bushes. Form B means a bore that is rounded on both sides. Made of special case-hardening steel, hardened to 740 ± 80 HV 10 and ground.