Drill bush DIN 179 form B, bore 9.6 mm, length 20 mm, outside dia 15 mm, case-hardened steel

With an outside diameter of 15 mm the bush is seated in the bore of the jig plate and guides the drill of 9.6 mm nominal diameter. The material is special case-hardening steel, hardened to 740 ± 80 HV 10, which keeps wear of the guide low over many workpieces.

Benefits

• Guide bore of 9.6 mm to DIN 179 for the matching drill
• Outside diameter of 15 mm as a ground seat in the jig plate
• Overall length of 20 mm in the medium version of the three lengths short, medium and long
• Special case-hardening steel, hardened to 740 ± 80 HV 10 and ground
• Bore to form B, that is rounded on both sides
• Bore rounded on both sides, so the bush can be fitted either way round

Applications

• Drilling jigs and drilling templates in series production
• Jig and fixture construction as well as tool making
• Holes in sheet metal, profiles and housings that have to be repeatable in position and diameter
• Maintenance and repair work when hole patterns are reworked

Standard and material

The bush is made to DIN 179 in form B, with the bore rounded on both sides. The material is special case-hardening steel, hardened to 740 ± 80 HV 10 and ground.