Cylindrical drill bush DIN 179 form A, bore 5.4 mm, length 10 mm, outside dia 10 mm, ground

With a guide bore of 5.4 mm this bush to DIN 179 accepts the drill and supports it over 10 mm of length. In form A the bore is rounded on one side, and the seat in the jig measures 10 mm.

Benefits

• Bore rounded on one side to form A, with a fixed fitting direction in the jig
• Overall length of 10 mm in the short version of the range short, medium and long
• Guide bore of 5.4 mm to DIN 179 for the matching tool
• Dimensions to DIN 179, so existing bushes can be replaced size for size
• Outside diameter of 10 mm as a ground seat in the drill plate

Applications

• Drilling jigs and drill templates in series production
• Jig and tool making
• Repeatable hole patterns in sheet metal, profiles and housings
• Maintenance work where hole patterns are reworked

Standard and material

Dimensions and design follow DIN 179. The material is special case-hardening steel, the hardness is 740 ± 80 HV 10, and the functional surfaces are ground.