Drill bush DIN 179 form A, bore 23.5 mm, length 36 mm, outside dia 35 mm, case-hardened steel

The medium version of 36 mm overall length is intended for jig plates of medium thickness and guides drills of 23.5 mm diameter. The bore follows form A of DIN 179 and is therefore rounded on one side, which makes it easier to enter the drill.

Benefits

• Guide bore of 23.5 mm to DIN 179 for the matching drill
• Outside diameter of 35 mm as a ground seat in the jig plate
• Overall length of 36 mm in the medium version of the three lengths short, medium and long
• Special case-hardening steel, hardened to 740 ± 80 HV 10 and ground
• Bore to form A, that is rounded on one side
• Bore rounded on one side, giving a defined fitting direction in the jig

Applications

• Drilling jigs and drilling templates in series production
• Jig and fixture construction as well as tool making
• Holes in sheet metal, profiles and housings that have to be repeatable in position and diameter
• Maintenance and repair work when hole patterns are reworked

Standard and material

The bush is made to DIN 179 in form A, with the bore rounded on one side. The material is special case-hardening steel, hardened to 740 ± 80 HV 10 and ground.