Drill bush DIN 179 form A, medium type, bore 22.5 mm, length 36 mm, outside dia 35 mm

The medium version of this DIN 179 bush guides drills of 22.5 mm over an overall length of 36 mm. In form A the bore is rounded on one side, which makes work in the jig easier.

Benefits

• Outside diameter of 35 mm as a ground seat in the drill plate
• Bore rounded on one side to form A, with a fixed fitting direction in the jig
• Guide bore of 22.5 mm to DIN 179 for the matching tool
• Special case-hardening steel, hardened to 740 ± 80 HV 10 and ground
• Guide length of about 1.6 drill diameters at 36 mm of length
• Overall length of 36 mm in the medium version of the range short, medium and long

Applications

• Fixed drill plates and hinged drilling jigs
• One-off and small batch production in mechanical engineering
• Drilling fitted holes on assemblies with a fixed hole position
• Inspection and marking templates in assembly

Standard and material

Dimensions and design follow DIN 179. The material is special case-hardening steel, the hardness is 740 ± 80 HV 10, and the functional surfaces are ground.