Drill bush DIN 179 form A, bore 16 mm, length 16 mm, outside dia 26 mm, case-hardened steel

The bush takes over the guidance of the drill directly at the workpiece. It is sized for a bore diameter of 16 mm and is 16 mm long. Form A to DIN 179 means that the bore is rounded on one side, while the outside diameter of 26 mm determines the fit in the fixture.

Benefits

• Special case-hardening steel, hardened to 740 ± 80 HV 10 and ground
• Bore to form A, that is rounded on one side
• Guide bore of 16 mm to DIN 179 for the matching drill
• Outside diameter of 26 mm as a ground seat in the jig plate
• Overall length of 16 mm in the short version of the three lengths short, medium and long
• Bore rounded on one side, giving a defined fitting direction in the jig

Applications

• Maintenance and repair work when hole patterns are reworked
• Gauge making and prototype work in small batches
• Drilling jigs and drilling templates in series production
• Jig and fixture construction as well as tool making

Standard and material

The bush is made to DIN 179 in form A, with the bore rounded on one side. The material is special case-hardening steel, hardened to 740 ± 80 HV 10 and ground.