Drill bush DIN 179 form A, short type, bore 15.5 mm, length 16 mm, outside dia 26 mm

Where a hole of 15.5 mm has to sit in the same place on every part, this DIN 179 bush guides the tool. The short length of 16 mm supports the drill, and the bore is rounded on one side.

Benefits

• Outside diameter of 26 mm as a ground seat in the drill plate
• Bore rounded on one side to form A, with a fixed fitting direction in the jig
• Guide bore of 15.5 mm to DIN 179 for the matching tool
• Special case-hardening steel, hardened to 740 ± 80 HV 10 and ground
• Guide length of about 1 drill diameters at 16 mm of length
• Overall length of 16 mm in the short version of the range short, medium and long

Applications

• Hole patterns in assembly jigs and equipment frames
• Workshop production with changing workpieces
• Redrilling and opening up holes on existing jigs
• Pattern making and mould making

Standard and material

The basis is DIN 179 for cylindrical drill bushes. Form A means a bore that is rounded on one side. Made of special case-hardening steel, hardened to 740 ± 80 HV 10 and ground.